Timmie's Speed Shop - Ratdaddy Studios

Timmie's Speed Shop

September 2018, almost a year has gone by, and I am finally able to continue work on Timmie's Speed Shop! The last time I built a scale shop I was about 10 years old. This will no doubt be a very long term project, which I will continue to build upon in between doing other work. I have been gathering parts for this for quite some time, and I'm working to super-detail every aspect of this huge project. Project start was 10/25/2017

TINY SCALE KUSTOMIZED COMPRESSOR
I DID A KANDY FADE-JOB ON THE TANK
SHOP TRUCK FINISHED!
RESIN JIMMY FLINTSTONE BODY ON LITTLE RED WAGON CHASSIS. THIS IS A CURBSIDE MODEL WITH MINOR DETAILS.
SHOP TRUCK!
DECALS WERE MADE ON INKJET PRINTER
RESIN ED ROTH TRIKE BODY
THIS WILL JUST HANG ONT HE SHOP WALL SOMEWHERE..... GIVEN TO ME BY MY BUDDY ROB LOPOL
KANDY AND FLAKE!
SHOP TRANSPORT TRAILER!
MINOR WORK IN PROGRESS STILL TO GO.....
RAMPS AND WHEEL CHOCKS ARE KANDY APPLE RED!
WORKING ON SOME OF THE MINIATURE TOOLS AND SUCH
09/08/2018
PORTABLE CHARGER UNIT
09/08/2018
PORTABLE CHARGER UNIT
KUSTOM METALIC GOLD PAINT!
FLAMED CREEPERS!
09/08/2018
ADDING INTERIOR WALLS
09/07/2018
ADDING INTERIOR WALLS
09/07/2018
MORE KUSTOM TROPHIES FINISHED
09/08/2018
MORE KUSTOM TROPHIES FINISHED
WALLS GLUED IN PLACE!
OUTSIDE WALLS GOING UP
WALLS BEING GlUED IN PLACE
6/17/18 Fathers Day work accomplished..... I took a few hours to do something for myself. All of the door and window openings have been cut out. Next job is to glue all of the outside walls in place, then lay down some base coats of paint.
6/17/18
THIS DIORAMA BUILD IS 44" X 22" IN SIZE!
MOCK-UP WITH OUTSIDE WALLS
Base cut, corners rounded, sanded top and bottom. Ready to start cutting some walls and glueing them down!
The coveted "Crystal Finky Award"
A FEW FINISHED TROPHIES AND GOODIES!
KUSTOM PAINTED TROPHIES
I LOVE THESE TROPHIES
PAINTING UP TROPHY BASES AND PARTS
More kustom trophies I have built....
These are so much fun to put together!!!!!!
I am addicted to these tiny trophies!!
Roof panels made...
The center and right side will be completely transparent so you can see inside. (They have protective film over them currently)
Floor filtration panel made...
The Caddy Couch...work in progress
HOK Kandy hot Pink
This will get flaked soon....
Silver basecoat on the right, kandy toner applied on left...
Resin Caddy Couch from Jimmy Flintstone Studios
These pieces were done by my good friend, the late Sonny DePalma....
A few stray parts in progress....
This vintage dragster will be one of the "in-progress" cars in the shop. I will be adding a few more parts to the chassis, and the motor will be on an engine stand next to it...
Box of in-progress goodies.....